Manual / Automatic FM200 Fire Suppression System Of 4.2Mpa 40L Type
|2||Scale of Protective region for one zone||area:max single-zone is 800m2 volume:max single-zone is 3600m3|
|6||Nitrogen Pressure of Driving Device||6.0±1.0Mpa(20℃)|
|7||Condition of reserving room for container||temperature: -10~50℃, relative humidity: ≤97%|
|8||max working pressure||5.3Mpa|
|9||min working pressure||4.2Mpa|
Fm200(htc-227ea) is a kind of colorless and tasteless and
non-corrosive and electricity-insulating gas without residue and
pollution after extinguishing. And ODP of it is zero. It is a
friendly-environment gas to be used for extinguishing. Also,
because of such feature, it can be used in special place where
electrical fire is easy to happen.
Combined with extinguishing device and electronic accessories, the
whole system can be actuated automatically. It can monitor the
situation of protective region through detectors and then it can
also start the extinguishing device through solenoid actuator
automatically. So the whole system can achieve automation totally.
Therefore, it can avoid that there is no one who notice the fire
when it happens and it also saves much money for employment to
supervise the protective area.
Management of Multiple zones is also in the safe control of the
whole system. We can use one system to protect multiple zones
through selective valves. It can let the whole system alternative
aiming at different protective zone. Agent can be discharged into
where the fire happens. It will be very efficient to put out fire
in short time. One thing that need to mention, is that a little
room should be prepare to be as storage space for the whole system.
Electronic computer room, a data processing center,
telecommunications facilities, process control, expensive medical
equipment, industrial equipment, library, museum and art gallery,
clean room, anechoic chamber, emergency power facilities, flammable
liquid storage area, etc.
The place where the fire is easy to happen, like paint-spraying
production line, aging-electrical equipment, rolling machine,
printing machine, oil switch, oil immersed transformer, melt
impregnating tank, tank, large generators, drying equipment, cement
pro duction process of pulverized coal, and the ship's engine room,
cargo hold, etc.
Fm200 Fire Suppression System Of 4.2mpa 40l Type is mainly composed
by three parts. Extinguishing devices and pipe fittings and
Extinguishing devices are such things, like cylinder to fill and
store fm200, frame and driving device(nitrogen cylinder) to trigger
the storage cylinder to discharge agent and so on.
Pipe fittings are those conduits to connect extinguishing device
and guide agent into protective zone, like high pressure galvanized
steel pipe and flange and elbow and so on.
Electrical accessories are those things which are used to detect
and monitor whole protective area and control whole system, also
warn people to evacuate and prevent from fire expansion.
These integrated three parts will be efficient to detect and
supervise and alarm and extinguish fire automatically.
Here attached below is complete composition of whole system,
Below attached is one mimic diagram of Fm200 Fire Suppression
System Of 4.2Mpa 40LType